SMD Resistor Code Calculator

Decode surface-mount resistor codes into resistance values, covering standard 3-digit and 4-digit numeric codes, R/K/M decimal notation, and EIA-96 1%-tolerance codes. Free online tool built for SMD parts where printed markings are too small for standard color bands.

Result

4.7 kΩ

Code type: 3/4-digit or R/K/M notation

Usage examples

Decoding a basic 3-digit SMD code

Enter "472" to get 4700Ω (4.7kΩ): the first two digits are significant figures, the third is the power-of-ten multiplier.

Reading an R/K/M decimal-point code

Enter "4R7" to get 4.7Ω, where the letter R stands in for the decimal point and the unit at once.

Looking up an EIA-96 1%-tolerance code

Enter a code like "01A" to decode the 2-digit EIA-96 index (a lookup into a published table of 3-significant-figure values) together with its multiplier letter.

Decoding a tighter-tolerance 4-digit code

Enter "1002" to get 10,000Ω (10kΩ): the first three digits (100) are significant figures and the last digit (2) is the ×10² multiplier, giving a third significant figure that plain 3-digit codes can't express.

Identifying a zero-ohm jumper resistor

Enter "000" (or "0000") to get 0Ω. Boards use these jumper-style SMD resistors in place of a wire link, and the all-zero marking is a deliberate special case rather than a misprint.

Resolving an EIA-96 code with an ambiguous-looking multiplier letter

Enter "68X" to get 499 × 0.1 = 49.9Ω. The letter X is one of two symbols (along with S) used for the ×0.1 multiplier, so don't assume every EIA-96 letter is unique to one multiplier value.

Quick reference

3/4-digit or R/K/M notation

SMD codeResult
R100.1 Ω
R470.47 Ω
1R01 Ω
2R22.2 Ω
4R74.7 Ω
10010 Ω
22022 Ω
47047 Ω
101100 Ω
221220 Ω
471470 Ω
1021 kΩ
1521.5 kΩ
2222.2 kΩ
3323.3 kΩ
4724.7 kΩ
6826.8 kΩ
10310 kΩ
15315 kΩ
22322 kΩ
33333 kΩ
47347 kΩ
104100 kΩ
224220 kΩ
474470 kΩ
1051 MΩ
1000100 Ω
10011 kΩ
47014.7 kΩ
100210 kΩ
470247 kΩ
1003100 kΩ
10041 MΩ

EIA-96 (2-digit + multiplier letter): code → significant figures

10–3334–5758–8182–09
10 = 12434 = 22158 = 39282 = 698
11 = 12735 = 22659 = 40283 = 715
12 = 13036 = 23260 = 41284 = 732
13 = 13337 = 23761 = 42285 = 750
14 = 13738 = 24362 = 43286 = 768
15 = 14039 = 24963 = 44287 = 787
16 = 14340 = 25564 = 45388 = 806
17 = 14741 = 26165 = 46489 = 825
18 = 15042 = 26766 = 47590 = 845
19 = 15443 = 27467 = 48791 = 866
20 = 15844 = 28068 = 49992 = 887
21 = 16245 = 28769 = 51193 = 909
22 = 16546 = 29470 = 52394 = 931
23 = 16947 = 30171 = 53695 = 953
24 = 17448 = 30972 = 54996 = 976
25 = 17849 = 31673 = 56201 = 100
26 = 18250 = 32474 = 57602 = 102
27 = 18751 = 33275 = 59003 = 105
28 = 19152 = 34076 = 60404 = 107
29 = 19653 = 34877 = 61905 = 110
30 = 20054 = 35778 = 63406 = 113
31 = 20555 = 36579 = 64907 = 115
32 = 21056 = 37480 = 66508 = 118
33 = 21557 = 38381 = 68109 = 121

EIA-96 (2-digit + multiplier letter): multiplier letter

LetterMultiplier01 + letter
Z×0.00101Z = 0.1 Ω
Y×0.0101Y = 1 Ω
R×0.0101R = 1 Ω
X×0.101X = 10 Ω
S×0.101S = 10 Ω
A×101A = 100 Ω
B×1001B = 1 kΩ
H×1001H = 1 kΩ
C×10001C = 10 kΩ
D×1,00001D = 100 kΩ
E×10,00001E = 1 MΩ
F×100,00001F = 10 MΩ

Frequently asked questions

What's the difference between this tool and the general Resistor Color Code Calculator?

The Resistor Color Code Calculator also has a built-in SMD mode that handles the same 3-digit, 4-digit, and R/K/M notations — so for those simpler codes, either tool gives the same answer and you can use whichever is more convenient. This tool adds full support for the EIA-96 code scheme (used on many 1%-tolerance SMD resistors), which the general calculator doesn't cover, making this the more complete reference for surface-mount parts.

How does the 3-digit and 4-digit numeric code work?

The last digit is a power-of-ten multiplier, and the digits before it are significant figures. For a 3-digit code like "472": 47 × 10² = 4700Ω (4.7kΩ). For a 4-digit code like "1001": 100 × 10¹ = 1000Ω (1kΩ). 4-digit codes are used on tighter-tolerance resistors that need a third significant figure.

What does the EIA-96 code mean?

An EIA-96 code has two parts: a 2-digit index (01–96) that looks up a 3-significant-figure value in a standardized table, followed by a single letter that sets the multiplier (for example Z=×0.001, A=×1, B or H=×10, C=×100, D=×1000). It's not something you can calculate from the digits directly — the 2-digit index maps to specific preferred values (the E96 series) via a published lookup table, which is why this tool hard-codes the full verified table rather than deriving it by formula.

What do R, K, and M mean in a code like 4R7?

They mark both the decimal point position and the unit at once. R means ×1 (ohms), K means ×1000 (kilohms), and M means ×1,000,000 (megohms), with the letter itself sitting where the decimal point goes. So 4R7 = 4.7Ω, 4K7 = 4.7kΩ, and 1M5 = 1.5MΩ.

Does this tool send anything to a server?

No. All decoding happens entirely in your browser and nothing you type is transmitted anywhere.

Why do some EIA-96 letters seem to repeat the same multiplier?

EIA-96 actually uses two overlapping letter systems for part of its multiplier range: R and Y both mean ×0.01, S and X both mean ×0.1, and H and B both mean ×10. Manufacturers pick one convention or the other, so you may see either letter for the same multiplier depending on who made the part. This tool recognizes both, but it's worth knowing if you're cross-checking against a datasheet or your own notes.

What does an all-zero code like "000" or "0000" mean?

It denotes a 0Ω resistor, commonly called a jumper or link resistor. Manufacturers use these in place of a wire trace or solder bridge, often so the same PCB layout can be populated differently (adding an actual resistor value in a later revision) without a board redesign. It isn't a blank or defective part marking.

How can I tell a 3-digit numeric code apart from a 2-digit-plus-letter EIA-96 code when the marking is worn?

The pattern gives it away even if a character is smudged: a numeric code is always 3 or 4 digits with no letters, while an EIA-96 code is always exactly 2 digits followed by a single letter (and that letter is never 0-9, so it won't be confused with a digit). If you can only make out "0_A" or similar, it's EIA-96; if every character you can read is a digit, it's the plain numeric scheme. A loupe or microscope helps a lot here since silkscreen-printed digits like 3, 5, and 8 are easy to misread at normal magnification.

Can a code like "4R7" ever mean something other than ohms?

On resistors, no — R always denotes ohms with the decimal point substituted in, so 4R7 is unambiguously 4.7Ω. Don't confuse this with capacitor or inductor markings, which reuse similar-looking R/K/M-style and 3-digit schemes but with different units (picofarads for ceramic capacitors, for example), so the same printed digits mean a different physical quantity on a different component type.