Freight Class Calculator

Estimate an NMFC freight class from your shipment's density for LTL trucking, using dimensions and weight you enter in your browser. Useful for sanity-checking a quote or comparing class before and after a packaging change, free and without sign-up.

Length unit
Weight unit

Result

Estimated freight class

125

Density

6.25 lb/ft³

Total weight

250 lb

Total volume

40 ft³

This calculator estimates freight class from density alone, using NMFTA's new 13-tier density scale that took effect July 19, 2025. Official NMFC classification for your specific commodity also factors in stowability, handling difficulty, and liability, and may differ from density alone. For anything shipment-critical, confirm with your carrier or the official NMFC.

Usage examples

Checking density and class for a palletized shipment

Enter one pallet's length, width, height, and weight to get its density (lb/ft³) and the corresponding estimated freight class right away.

Calculating a shipment of multiple identical boxes

Enter a quantity to combine total weight and total volume across several identical boxes or pallets, then see the overall shipment density and class.

Sanity-checking an LTL quote before booking

Get a rough sense of the likely class before contacting a carrier, as a reference for judging whether a quoted rate seems reasonable.

Comparing class before and after better packaging

Switching from a loosely packed box to a snugly fitted one increases density and often drops the freight class (and the rate) — run both sets of dimensions to see the potential savings.

Budgeting for a recurring shipment of the same product

Calculate the class once for a standard SKU's dimensions and weight, then reuse that figure whenever you estimate shipping cost for future orders of the same item.

Quick reference

Density-based freight class bands (lb/ft³, lower bound inclusive)

DensityEstimated freight class
0 – < 1 lb/ft³400
1 – < 2 lb/ft³300
2 – < 4 lb/ft³250
4 – < 6 lb/ft³175
6 – < 8 lb/ft³125
8 – < 10 lb/ft³100
10 – < 12 lb/ft³92.5
12 – < 15 lb/ft³85
15 – < 22.5 lb/ft³70
22.5 – < 30 lb/ft³65
30 – < 35 lb/ft³60
35 – < 50 lb/ft³55
50+ lb/ft³50

Estimated freight class for one 48 × 40 in pallet by height and total weight

Pallet size250 lb500 lb750 lb1,000 lb1,500 lb2,000 lb
48 × 40 × 24 inClass 100 (9.38 lb/ft³)Class 70 (18.75 lb/ft³)Class 65 (28.13 lb/ft³)Class 55 (37.5 lb/ft³)Class 50 (56.25 lb/ft³)Class 50 (75 lb/ft³)
48 × 40 × 36 inClass 125 (6.25 lb/ft³)Class 85 (12.5 lb/ft³)Class 70 (18.75 lb/ft³)Class 65 (25 lb/ft³)Class 55 (37.5 lb/ft³)Class 50 (50 lb/ft³)
48 × 40 × 48 inClass 175 (4.69 lb/ft³)Class 100 (9.38 lb/ft³)Class 85 (14.06 lb/ft³)Class 70 (18.75 lb/ft³)Class 65 (28.13 lb/ft³)Class 55 (37.5 lb/ft³)
48 × 40 × 60 inClass 250 (3.75 lb/ft³)Class 125 (7.5 lb/ft³)Class 92.5 (11.25 lb/ft³)Class 85 (15 lb/ft³)Class 65 (22.5 lb/ft³)Class 65 (30 lb/ft³)
48 × 40 × 72 inClass 250 (3.13 lb/ft³)Class 125 (6.25 lb/ft³)Class 100 (9.38 lb/ft³)Class 85 (12.5 lb/ft³)Class 70 (18.75 lb/ft³)Class 65 (25 lb/ft³)

Frequently asked questions

Is this result the same as my official freight class?

Not necessarily. This calculator estimates class from density alone, which is the primary factor for most general commodities. Official NMFC classification can also depend on stowability, handling difficulty, and liability for certain commodity types. For anything shipment-critical where the class materially affects your cost, confirm with your carrier or the official NMFC.

Is this density table up to date?

Yes. It uses NMFTA's new 13-tier density scale, effective July 19, 2025, which replaced the prior 11-tier scale and added classes 50 and 55 at the high-density end.

How are boundary values handled (e.g. exactly 10 lb/ft³)?

Each density tier includes its lower bound and excludes its upper bound. So a density of exactly 10.0 lb/ft³ falls in the '10 to under 12' tier (class 92.5), not class 100 (8 to under 10).

Do I need to fill in the quantity field?

If you're calculating a single box or pallet, leave quantity at 1. If your shipment has several identical boxes or pallets, enter the quantity to get the combined density across the whole shipment.

Does a lower class number mean cheaper or more expensive freight?

Cheaper. Freight class runs from 50 (densest, least expensive to ship) to 500 (least dense, most expensive), so a lower class number generally means a lower rate for the same weight.

Why would two identical-looking boxes get different classes?

If their actual weights differ even slightly, their densities differ too, and density is what determines class under this density-only method — a heavier box of the same size lands in a lower (cheaper) class.

Does packaging material count toward the weight and dimensions?

Yes. Use the full outer dimensions and total weight of the package as it will actually ship, including any pallet, crate, or padding — not just the product itself.