Paint Calculator

Free paint calculator to estimate how many liters or gallons of paint you need based on wall area, number of coats, and your paint's coverage rate. Switch between metric and imperial units to plan a single room or a full multi-wall paint job in your browser.

Unit
×
Result

Add at least one wall's width and height to estimate how much paint you need.

Usage examples

Painting a single bedroom

Add each wall's width and height, subtract the door and window area, and see how many liters or gallons to buy.

Planning for two coats

Set the number of coats to 2 (the usual recommendation for a color change) to get an accurate total.

Switching between metric and imperial

Toggle between meters and feet — your entered wall dimensions convert automatically, they don't just get relabeled.

Estimating paint for a full room with four walls

Add two 4 m × 2.5 m walls and two 3 m × 2.5 m walls (35 m² total), subtract a 1.6 m × 2.0 m door and a 1.2 m × 1.2 m window (4.64 m²), and with a coverage of 10 m²/L and 2 coats you'll need about 6.07 L.

Estimating paint for a large open area with a single coat

Add one wall sized 10 m by 3 m with no openings to subtract, set coats to 1 for a primer-only pass, and see exactly how much paint that single coat requires.

Quick reference

Walls only, 2.4 m (~8 ft) ceiling, 10 m²/L coverage

Room sizeWall area (m²)1 coat (L)2 coats (L)
10 x 10 ft (small room)29.32.95.9
12 x 12 ft (medium room)35.13.57
15 x 20 ft (living room)51.25.110.2

Frequently asked questions

Where do I find my paint's coverage rate?

It's usually printed on the paint can label, often as something like “10 m² per liter” or “350 sq ft per gallon.” Enter that number directly — the field adjusts to match whichever unit system you're using.

Does this account for texture, porosity, or primer?

No — this is a straightforward area-based estimate. Textured or very porous surfaces, unprimed drywall, and dramatic color changes can all increase actual usage beyond this estimate, so it's wise to round up and buy a little extra.

Is my data saved anywhere?

Your wall dimensions and settings are saved only in your own browser's local storage, never sent anywhere.

How exactly is the paint amount calculated?

The tool sums each wall's width times height, subtracts the doors/windows area you enter, multiplies that net area by the number of coats, then divides by the coverage rate: (net area × coats) ÷ coverage.

Should I subtract small openings like outlets or light switches?

Not usually — their area is negligible. The subtract field is meant for doors, windows, and other large openings where leaving them in would meaningfully overestimate how much paint you need.

Can I use this for ceilings too?

Yes — add the ceiling as another "wall" using its length and width as the two dimensions. Just be aware that ceilings often need a different, flat-finish paint with its own coverage rate, so enter that rate rather than your wall paint's rate when ceilings are mixed into the total.

Does switching units change the actual result?

No — switching between meters and feet converts your wall dimensions automatically, so the calculated paint amount stays the same. Just double check the coverage rate field after switching, since it still reflects whatever number you typed in and won't auto-convert to a different unit's equivalent.